KAIST develops VR technology that lets users ‘see’ the sense of touch

AI News2天前更新 iowen
9 0 0

KAIST develops VR technology that lets users 'see' the sense of touch

Computed from 4th level (3rd division) of quadtree roughness parameters (Ra). Figure 10 shows an example of the visual code generated from the reference coefficients (named the average roughness of the surfaces sampled Raavg) and the level of greater detail used for example, in the case the fourth level of the quadtree (3rd subdivision). In this way, it is possible to visually identify the pattern of the sampled surface and compare it with another surface by its roughness signature. Figure 9 presents the computation of the information generated by this new software for the analysis and evaluation of Predictive analytics the roughness of the surfaces sampled. After the computation of the roughness parameters at different levels of the tree, the information for representation and analysis of the results are processed in other software. In this way, the user can evaluate the roughness coefficients at the various subdivisions.

  • The ellipses fitted by this fitting method are typically represented in the form of standard ellipse equations.
  • Here, represents the incident light intensity, represents the diffuse reflection coefficient, and represents the Angle between the incident light and the surface normal.
  • Figure 1 illustrates that, at the macroscopic scale, images with different roughness levels are susceptible to light source noise, yet there are still discernible differences between them.
  • The angle between the surface normal of the ellipse and the Y-axis is , which can be expressed as Eq.
  • In order to accurately simulate the change of the reflected light intensity with the roughness of the grinding surface, the Lambert illumination model is selected to construct the surface reflection model in this paper.

It is relevant to note that the roughness parameters of the different branches of the tree are not obtained by average; they are recalculated, which determines the better accuracy of the parameters. This process is recursive; that is, the points are also classified within the region of the successive subdivisions. It is common for a surface to introduce a coefficient variation according to the local sampling of roughness.

Coefficients or roughness parameters, calculated over the whole surface, indicate the average or overall values for the entire sample region. Although it is possible to explore other values, in this work it was not considered relevant to perform https://aicurated.com/computer-vision-and-perception/kaist-makes-virtual-roughness-visible-for-shared-vr-tasks/ experiments with other values. In the performed tests, this parameter is defined as 5, as described in6. Another important question of implementation is the division of the surface area or part of it into samples or patches.

Fitting plan computation

KAIST develops VR technology that lets users 'see' the sense of touch

To evaluate the results, the visual signatures of all the surfaces are compared. In other columns are showed mean (Raavg), minimum (Ramin), maximum (Ramax) and standard deviation (Rasdv) for each set of Ra. Finally, the visual information was obtained for analysis and evaluation of the results. In addition to the coefficients, the reference values (Raavg, Ramin, and Ramax) are also plotted on the chart and, in a general way, the variations of the coefficients of the surfaces are evaluated. The histogram can be used to verify the dispersion of the coefficients Ra with respect to the mean (Raavg) for each surface.

  • The Figure 12 depicts the fitting curves of roughness and brightness for each classification interval.
  • This paper presents a visual inspection method that can eliminate the influence of self-affine grinding surfaces.
  • In these four correlation functions, the average brightness of image pixels increases with an increase in the roughness parameter.
  • Correlation functions for the G1 interval (A), the G2 interval (B), the G3 interval (C) and the G4 interval (D).
  • Concurrently, researchers may endeavor to integrate binocular reconstruction technology with the illumination method proposed in this paper, thereby investigating the broader potential applications of this fusion technology in the domain of surface reconstruction.
  • Accuracy and Loss curves for each model using different datasets (A) Accuracy curve for D1 (B) Loss curve for D1 (C) Accuracy curve for D2 (D) Loss curve for D2 (E) Accuracy curve for D3 (F) Loss curve for D3.

Partners without haptics felt more involved

This non-absolute value is the basis for the computation of the other roughness parameters, whose formulations are presented in6 and mentioned in Section 2. Figure 7 shows an example of a fitting plane that has been computed through its coefficients (matrix B) and the points at the corners of the surface. To calculate the fitting plane, the least squares product technique is used, whose objective is to find the coefficients of this support plane from the points of the surface. The process steps must be set so as not to impair the operation of the equipment or the reading of data.

Lean Quality Improvement Reduces ICU Medication Waste by Nearly Thirty-Two Percent

KAIST Visualizes Virtual Roughness to Boost VR Collaboration – Bioengineer.org

KAIST Visualizes Virtual Roughness to Boost VR Collaboration.

Posted: Sat, 14 Nov 2026 21:20:15 GMT source

In addition to the visual signature of roughness, are also proposed the use https://aicurated.com/ of other metrics to evaluate and compare roughness (Ra) among surfaces. For the tests executed, the fourth subdivision level (1.5625 mm2) is used to exemplify the signature generation of the block, because it is not that far from the reading accuracy of the LiDAR equipment (0.1 mm) and with a reasonable number of points (≈156 points) for a range of Ra values. The maximum defined depth level (the least evaluated detail of the quadtree) is a user parameter.

KAIST develops VR technology that lets users 'see' the sense of touch

Visual cues speed up collaboration

  • Roughness, fractal-like property, grinding surface, fractal imaging, deep learning, two-scale fractal theory
  • This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY).
  • Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
  • Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
  • Behind every published article stand expert reviewers safeguarding science.

The y-axis represents the number of times (frequency) that a certain shade of gray appears in the code. The Big data x-axis of the histogram represents the 256 possible values of gray tones, white (Ramin) to black (Ramax). First, from the color composition of the visual code, a histogram is built to check the frequency of the colors and compare the dispersion or concentration within the range of values Ramin (white) and Ramax (black). Figure 10 gives an example of the metric set used for roughness evaluation and comparison.

KAIST develops VR technology that lets users 'see' the sense of touch

© 版权声明

相关文章

没有相关内容!

暂无评论

none
暂无评论...